Full exposure

The Polished Concrete Full Stone Finish uses a deeper grinding process to fully expose the aggregate within the concrete. Scratch marks are then progressively removed to produce a fully polished concrete floor.

This highlights the natural beauty of the individual stones that would otherwise remain hidden within the concrete floor.

Procedure

1. Grind with 20/30 grit to achieve desired exposure and flatness

2. Grind with 50/60 grit to remove scratches

3. Apply GM3000 while grinding 100/120 grit to fill small holes and imperfections

4. Harden using HiperHand Densifier/Hardener applied by broom

5. Remove excess HiperHand Densifier/Hardener using 50 grit resin bond pads

6. Apply lick coat of HiperHand Densifier/Hardener – allow to dry

7. Remove HiperHand Densifier/Hardener with 100 grit resin bond

8. Repeat 6 if required

9. Remove HiperHand Densifier/Hardener with 200 grit resin bond

10. Polish with 400 grit--------------------------------Matt Finish

11. Polish with 800 grit--------------------------------Satin Finish

12. Polish with 1500 grit

13. Polish with 3000 grit-------------------------------Full Gloss

14. Apply 2 coats Hiperguard Enhancer plus sealer – allow to dry

15. Buff off excess Enhancer

Concrete Requirements- Concrete needs to be 28 mpa strength or higher